How do I install the Rear-Facing Base?

Step 1

Place the car seat on a clean, stable surface with the inside of the seat facing down.

Step 2

Line the Rear-Facing Base Retention Hooks up with the openings in the bottom of the car seat, as shown in Figure 103. Insert the Rear-Facing Base Retention Hooks into the openings and slide the base down until you hear the Rear-Facing Base Release Lever “click” to lock the base on as shown in Figure 104.

Step 3

Pull up on Rear-Facing Base to check that it is locked in place.

figure 103
Figure 103
figure 104
Figure 104